Komatsu PC490-10 demolition kit

You are here: Fumotec » Models » Komatsu PC490 MRD

Komatsu PC490-10 demolition kit

Item number: 4903

5.976,20 € ()

   Incl. 19 % VAT plus shipping

Cannot be delivered to the following countries:

delivery in 3-6 week

INFO: In the tabsNEEDED ACCESSORIESand MODEL ACCESSORIESbelow, you will find all the necessary parts for building and expanding your personal dream model. After the desired transfer to the shopping cart, you can return to the respective store area via CONTINUE SHOPPING.

The model shown is an example and may include optional special accessories. The basic kit is supplied unpainted and not assembled.

With this model of the Komatsu PC490MRD, you have maximum flexibility. Whether as a beefy PC490 with earthmoving boom or with the optionally available boom extension as a PC490 demolition excavator for medium reach demolition - abbreviated MRD. In both variants, the arm can be attached either stretched or bent. The hydraulic quick connectors in the fixed piping allow the connection and disconnection of all 12 lines with only 2 screws! The PC490MRD is based on the proven PC490 and has been equipped with a tiltable cabin and the special demolition jib. A 6-fold valve block is included in the scope of delivery.

Technical data:

-Length of track drive: 388 mm

-Width of crawler track: 252 mm

-Height to upper edge of cabin: 240 mm

-scale: 1:14,5

-Weight 21-22 kg

To get the model ready to run you still need the following components:

-brushless controller for the pump motor (e.g. Robbe Roxxy 722)

-brushless controller for the drive motors (e.g. Robbe Roxxy 725 4D)

-controller for slewing gear (e.g. Servonaut MFX)

-Servos for the hydraulic valves (e.g. Hitec HS-325 HB or similar)

-receiver (at least 7 channels)

-battery (e.g. Lipo 3S 5000 mAh)

-approx. 0.5l hydraulic oil

-hydraulic seal fluid and screw lock

For tiltable cabin:

-Electric cylinder CTI Titan 10

-CTI controller for electric cylinder Thor 4 HF Titan controller

Alternatively on request hydraulic cylinder for tilting cabin

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

  • Scale parts Komatsu PC490-10 demolition

    Scale parts Komatsu PC490-10 demolition

    417,50 €*

  • Sticker set PC490

    Computer-cut sticker set for the prototypical design of your model (for licensing reasons only available for the design of a Fumotec model)

    17,45 €*

  • Stone guard for cabin PC490

    96,20 €*

  • Anti-slip pads PC490-AB, laser-cut for a perfect fit

    With these precise laser-cut anti-slip pads you design your upper carriage absolutely true to the original! The pads are fixed with micro tabs in the card and can be easily removed without tools. The pads are self-adhesive for super easy use.

    17,55 €*

  • Hydraulic swivel changer

    With the hydraulic swivel changer kit, all attachments can be swiveled 30° to the right and left. A real novelty in the functional model construction sector, until now the swiveling was only possible with appropriately equipped ditch clearing buckets. This is of course also possible here in conjunction with the ditching bucket Order No. 490-98. The swivel changer is supplied as a kit as shown. The cylinders are mounted ready for operation. The enclosed assembly diagrams will help you with the assembly.

    312,20 €*

  • Hydraulic quick coupler

    Hydraulic quick coupler

    255,90 €*

  • Hydraulic Fumotec tilt with hydraulic quick coupler

    Hydraulic swivel hitch with hydraulic quick coupler

    424,35 €*

  • Conversion of swivel changer to tilt changer with hydra

    Conversion of swivel coupler to tilt coupler with hydraulic quick coupler

    155,55 €*

  • Ditching bucket for PC490 hydraulically swiveling

    195mm wide

    419,90 €*

  • Delta backhoe bucket

    Delta backhoe bucket for the PC490-10. The bucket is supplied blank as shown on the attachments home page as an example. The cutting edge is 100mm wide.

    190,60 €*

  • Ditching bucket

    The ditching bucket has a width of 195 mm. Optimally complemented with the hydraulic swivel changer Order No. 490-110. Supplied as shown as a bare part soldered ready for painting.

    212,85 €*

  • Multiripper

    Mutliripper for the PC490-10. The bucket is supplied blank as seen on the home attachments as an example. The cutting edge is 70mm wide. This bucket is especially suitable for hard soils

    197,20 €*

  • Fang PC490

    Ripper tooth for the PC490-10. The ripper tooth is supplied blank as shown on the Attachments home page as an example.

    182,70 €*

  • Rotary sieve bucket

    Rotary sieve bucket

    641,15 €*

  • Sieve spoon

    The sieve bucket for the PC490-10. The bucket is supplied blank. The cutting edge is 100mm wide.

    212,85 €*

  • Backhoe bucket wide

    Wide backhoe bucket for the PC490-10. The bucket is supplied blank as shown on the attachments home page as an example. The cutting edge is 110mm wide.

    195,55 €*

  • Backhoe bucket with straight edge

    Backhoe bucket with straight cutting edge for the PC490-10. The bucket is supplied blank as shown on the attachments home page as an example. The cutting edge is 90mm wide.

    187,85 €*

  • Backhoe narrow

    Narrow backhoe bucket for the PC490-10. The bucket is supplied blank as shown on the attachments home page as an example. The cutting edge is 70mm wide.

    185,35 €*

  • Servonaut excavator sound module SMB

    space-saving installation, dimensions in mm approx. 55 x 28 x 13 further information can be found on the Servonaut website

    191,00 €*

  • Servonaut LAUT 16 mini speaker 16 Ohm

    Miniature loudspeaker 16 Ohm / 3W, dimensions: approx. D=50mm, H=18mm more information can be found on the Servonaut website

    11,00 €*

  • Soundset Bagger

    199,00 €*

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

Kit contents (subject to technical changes)

Your Fumotec model should be ready for immediate use or a Fumotec model kit should be shipped to you already painted?

We now offer three attractive service offers that support the desire for a finished and ready-to-use model from the very beginning. With our service you get once more the possibility to realize your dream model with Fumotec. We are presenting an attractive offer with a unique variety of models for every taste. Orders for construction and painting services are individual custom-made products and therefore excluded from revocation and exchange!

  • Building service PC490 demolition

    You don't have the time or the desire to build? You want to get your model ready for another reason? We build your Fumotec dream model ready for use for you!

    1.498,40 €*

  • Painting Service PC490 Demolition Basic

    The Basic painting service includes painting with high-quality 2-component uni paints in Komatsu design. The cab is not painted inside and may have paint mist, the quick coupler is painted in the gray tone of the undercarriage. The Basic paint finish is our low-cost alternative. Our goal is to color the parts with a high quality paint and the skilled hand of a professional for a fair price. Visible parts are sanded before painting. Components that are not in the visible area may have a slight surface texture.

    1.123,30 €*

  • Painting service PC490 demolition exclusive

    Painting service PC490 Exclusive - the name of this offer stands for itself. With this high-end painting, the corresponding components are provided with an elaborate multi-layer paint job. A lot of effort is put into the type designation as well as the original manufacturer's lettering of the model: These are painted with much attention to detail in this service!

    1.598,10 €*

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

Wir verwenden Cookies um unsere Website zu optimieren und Ihnen das bestmögliche Online-Erlebnis zu bieten. Mit dem Klick auf „Erlauben“ erklären Sie sich damit einverstanden. Weiterführende Informationen erhalten Sie in unserer Datenschutzerklärung.