-
Scale parts Komatsu PC490-10 demolition
Scale parts Komatsu PC490-10 demolition
417,50 €*
-
-
-
Sticker set PC490
Computer-cut sticker set for the prototypical design of your model (for licensing reasons only available for the design of a Fumotec model)
17,45 €*
-
Anti-slip pads PC490, precision fit laser cut
With these precise laser-cut anti-slip pads you design your upper carriage absolutely true to the original! The pads are fixed with micro tabs in the card and can be easily removed without tools. The pads are self-adhesive for super easy use.
17,55 €*
-
Anti-slip pads PC490-AB, laser-cut for a perfect fit
With these precise laser-cut anti-slip pads you design your upper carriage absolutely true to the original! The pads are fixed with micro tabs in the card and can be easily removed without tools. The pads are self-adhesive for super easy use.
17,55 €*
-
Hydraulic quick coupler
Hydraulic quick coupler
255,90 €*
-
Hydraulic swivel changer
With the hydraulic swivel changer kit, all attachments can be swiveled 30° to the right and left. A real novelty in the functional model construction sector, until now the swiveling was only possible with appropriately equipped ditch clearing buckets. This is of course also possible here in conjunction with the ditching bucket Order No. 490-98. The swivel changer is supplied as a kit as shown. The cylinders are mounted ready for operation. The enclosed assembly diagrams will help you with the assembly.
312,20 €*
-
Hydraulic Fumotec tilt with hydraulic quick coupler
Hydraulic swivel hitch with hydraulic quick coupler
424,35 €*
-
-
Delta backhoe bucket
Delta backhoe bucket for the PC490-10. The bucket is supplied blank as shown on the attachments home page as an example. The cutting edge is 100mm wide.
190,60 €*
-
Ditching bucket
The ditching bucket has a width of 195 mm. Optimally complemented with the hydraulic swivel changer Order No. 490-110. Supplied as shown as a bare part soldered ready for painting.
212,85 €*
-
-
Multiripper
Mutliripper for the PC490-10. The bucket is supplied blank as seen on the home attachments as an example. The cutting edge is 70mm wide. This bucket is especially suitable for hard soils
197,20 €*
-
Fang PC490
Ripper tooth for the PC490-10. The ripper tooth is supplied blank as shown on the Attachments home page as an example.
182,70 €*
-
Rotary sieve bucket
Rotary sieve bucket
641,15 €*
-
Sieve spoon
The sieve bucket for the PC490-10. The bucket is supplied blank. The cutting edge is 100mm wide.
212,85 €*
-
Backhoe bucket wide
Wide backhoe bucket for the PC490-10. The bucket is supplied blank as shown on the attachments home page as an example. The cutting edge is 110mm wide.
195,55 €*
-
Backhoe bucket with straight edge
Backhoe bucket with straight cutting edge for the PC490-10. The bucket is supplied blank as shown on the attachments home page as an example. The cutting edge is 90mm wide.
187,85 €*
-
Backhoe narrow
Narrow backhoe bucket for the PC490-10. The bucket is supplied blank as shown on the attachments home page as an example. The cutting edge is 70mm wide.
185,35 €*
-
Servonaut excavator sound module SMB
space-saving installation, dimensions in mm approx. 55 x 28 x 13 further information can be found on the Servonaut website
191,00 €*
-
Servonaut LAUT 16 mini speaker 16 Ohm
Miniature loudspeaker 16 Ohm / 3W, dimensions: approx. D=50mm, H=18mm more information can be found on the Servonaut website
11,00 €*
-
no products were found that match your selection criteria.
* All prices plus VAT plus shipping