HM300-5 Powerdrive & Scaleart Axles Kit

For your numerous model building sites where you need a maneuverable and all-terrain dump truck, we have Komatsu's HM300-5 articulated dump truck in our program. We have come up with something special for the HM300-5: Fumotec offers you the choice between two different drive systems!

On the one hand, the Fumotec Powerdrive with 6 electric drive motors, one per wheel, housed in the hub. Your advantage: The concept offers many power reserves, especially with a full trough.

On the other hand, as a variant with axles from the company Scaleart. Here the HM300-5 has an electric drive motor, 3-speed transmission and three differentials. The model is technically particularly demanding and offers a particularly realistic driving image in difficult terrain.

You have the choice...

Kit HM300 Fumotec Powerdrive axles

Item number: 3000

4.986,70 € ()

   Incl. 19 % VAT plus shipping

Cannot be delivered to the following countries:

delivery in 3-6 week

INFO: In the tabs NEEDED ACCESSORIES and MODEL ACCESSORIES below, you will find all the necessary parts for building and expanding your personal dream model. After the desired transfer to the shopping cart, you can return to the respective store area via CONTINUE SHOPPING.

The HM300-5 with the Powerdrive axles. Our in-house drive with brushless motors at the wheel hubs. The model kit comes incl. hydraulic components, drive motors, steel frame parts, GRP fairing parts and 3D printed parts.

Technical data:

-Length: 730mm

-Width: 208mm

-Height to top of cabin: 256mm

-Weight: 10.2kg

Accessories required for operation:

The electronics set

2 pieces servos for hydraulic valves (e.g. Hitec HS-5065MG)

1 piece of controller for hydraulic pump (e.g. Roxxy 722 or similar)

6 pieces controller for traction drive (e.g. Roxxy 725 4D or similar)

Receiver, with at least 6 channels

Battery Lipo 3S 5000 mAh

0,5 liter hydraulic oil (Fumotec order no. 15/2)

Hydraulic seal fluid (Fumotec order no. 15/20)

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

Kit contents (subject to technical changes)

Your Fumotec model should be ready for immediate use or a Fumotec model kit should be shipped to you already painted?

We now offer three attractive service offers that support the desire for a finished and ready-to-use model from the very beginning. With our service, you get once more the possibility to realize your dream model with Fumotec. We are presenting an attractive offer with a unique variety of models for every taste. Orders for construction and painting services are individual custom-made products and therefore excluded from revocation and exchange!

  • Building service HM300-5

    You don't have the time or the desire to build? You want to get your model ready for another reason? We build your Fumotec dream model ready for use for you!

    1.320,20 €*

  • Painting service HM300-5 Basic

    The Basic painting service includes painting with high-quality two-tone uni paints in Komatsu design. The cab is not painted on the inside and may show paint mist. Painting Basic is our low-cost alternative. Our goal is to color the parts with a high quality paint and the skilled hand of a professional for a fair price. Visible parts are sanded before painting. Components that are not in the visible area may have a slight surface texture.

    896,50 €*

  • Painting service HM300-5 Exclusive

    Painting service HM300-5 Exclusive - the name of this offer stands for itself. With this high-end paint job, the corresponding components are given an elaborate multi-layer paint job. A lot of effort is put into the type designation as well as the original manufacturer's lettering of the model: These are painted with much attention to detail in this service!

    1.560,50 €*

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

Alternative

Kit HM300 Scaleart axles

Item number: 3002

6.212,30 € ()

   Incl. 19 % VAT plus shipping

Cannot be delivered to the following countries:

delivery in 3-6 week

INFO: In the tabs NEEDED ACCESSORIES and MODEL ACCESSORIES below, you will find all the necessary parts for building and expanding your personal dream model. After the desired transfer to the shopping cart, you can return to the respective store area via CONTINUE SHOPPING.

Technical data:

-Length: 730mm

-Width: 208mm

-Height to top of cabin: 256mm

-Weight: 12.1g

The proven Scaleart construction machinery axles in combination with the Veroma 3-speed transmission.

The model kit comes incl. hydraulic components, a drive motor, steel frame parts, GRP fairing parts and 3D printed parts.

Accessories required for operation:

1 drive motor for traction drive (Truckpuller or Quickrun fusion 1200 KV)

2 pieces servos for hydraulic valves (e.g. Hitec HS-5065MG)

3 pieces servos for gearbox and differential locks (e.g. Hitec HS-81)

1 piece of controller for traction drive (recommended Servonaut S22 or integrated ESC in Quickrun fusion 1200 KV)

1 piece of controller for hydraulic pump (e.g. Roxxy 722 or similar)

Receiver with at least 6 channels

Battery Lipo 3S 5000 mAh

0,5 liter hydraulic oil (Fumotec order no. 15/2)

Hydraulic seal fluid (Fumotec order no. 15/20)

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

Kit contents (subject to technical changes)

Your Fumotec model should be ready for immediate use or a Fumotec model kit should be shipped to you already painted?

We now offer three attractive service offers that support the desire for a finished and ready-to-use model from the very beginning. With our service, you get once more the possibility to realize your dream model with Fumotec. We are presenting an attractive offer with a unique variety of models for every taste. Orders for construction and painting services are individual custom-made products and therefore excluded from revocation and exchange!

  • Building service HM300-5

    You don't have the time or the desire to build? You want to get your model ready for another reason? We build your Fumotec dream model ready for use for you!

    1.320,20 €*

  • Painting service HM300-5 Basic

    The Basic painting service includes painting with high-quality two-tone uni paints in Komatsu design. The cab is not painted on the inside and may show paint mist. Painting Basic is our low-cost alternative. Our goal is to color the parts with a high quality paint and the skilled hand of a professional for a fair price. Visible parts are sanded before painting. Components that are not in the visible area may have a slight surface texture.

    896,50 €*

  • Painting service HM300-5 Exclusive

    Painting service HM300-5 Exclusive - the name of this offer stands for itself. With this high-end paint job, the corresponding components are given an elaborate multi-layer paint job. A lot of effort is put into the type designation as well as the original manufacturer's lettering of the model: These are painted with much attention to detail in this service!

    1.560,50 €*

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

Wir verwenden Cookies um unsere Website zu optimieren und Ihnen das bestmögliche Online-Erlebnis zu bieten. Mit dem Klick auf „Erlauben“ erklären Sie sich damit einverstanden. Weiterführende Informationen erhalten Sie in unserer Datenschutzerklärung.