Komatsu PC490-10 kit with 5-way valve block

You are here: Fumotec

Komatsu PC490-10 kit with 5-way valve block

Item number: 4901

The scope of delivery includes all components required for construction (hydraulics, drives, etc., see the Kit Contents gallery), as well as two hydraulic add-on connections on the stick incl. control valves and a bucket.

5.081,00 € ()

   Incl. 19 % VAT plus shipping

Cannot be delivered to the following countries:

delivery in 3-6 week

Remember this for later

INFO: In the tabs NEEDED ACCESSORIES and MODEL ACCESSORIES below, you will find all the necessary parts for building and expanding your personal dream model. After the desired transfer to the shopping cart, you can return to the respective store area via CONTINUE SHOPPING.

The PC490-10 combines the typical Fumotec performance and durability, true to the scale of the original. The model has an extremely powerful drive system with metal chain links made of steel, each of which can be driven by a brushless motor. These engines deliver their power to the tours through a planetary gear with a stable steel bevel gear and solid steel gears. The hydraulics use tested Fumotec cylinders, which are, of course, specially adapted for the model.

A look at the detailed assembly instructions shows that each page of these instructions in the kit has its own separate assembly described. This means that you always have exactly the components needed for the current assembly at hand during assembly. The assembly itself is designed to be as simple as possible. No special tools or special workshop equipment are required. The Komatsu PC490-10 kit includes the hydraulic components with a 5-way valve block and two hydraulic auxiliary connections on the stick.

Technical data:

-Length of track drive: 388 mm

-Width of track drive: 252 mm

-Height to upper edge of cabin: 240mm

-Scale: 1:14,5

-Weight 18-20 kg

To get the model ready to run you still need the following components:

-brushless controller for the pump motor (e.g. Robbe Roxxy 930)

-brushless controller for the drive motors (e.g. Robbe Roxxy 908)

-controller for slewing gear (e.g. Servonaut MFX)

-Servos for the hydraulic valves (e.g. Graupner DES577 or similar)

-receiver (at least 7 channels)

-battery (e.g. Lipo 3S 5000 mAh)

-approx. 0.5l hydraulic oil

-Hydraulic seal fluid and threadlocker

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

  • Scale parts Komatsu PC490-10

    320,20 €*

  • Sticker set PC490

    for licensing reasons only available for designing a Fumotec model

    17,45 €*

  • Stone guard for cabin PC490

    96,20 €*

  • Hydraulic quick coupler

    Hydraulic quick coupler

    255,90 €*

  • Hydraulic swivel changer

    312,20 €*

  • Hydraulic Fumotec tilt with hydraulic quick coupler

    Hydraulic swivel hitch with hydraulic quick coupler

    424,35 €*

  • Anti-slip pads PC490, precision fit laser cut

    With these precise laser-cut anti-slip pads you design your upper carriage absolutely true to the original! The pads are fixed with micro tabs in the card and can be easily removed without tools. The pads are self-adhesive for super easy use.

    17,55 €*

  • Ditching bucket for PC490 hydraulically swiveling

    195mm wide

    419,90 €*

  • Delta backhoe bucket

    Delta backhoe bucket for the PC490-10. The bucket is supplied blank as shown on the attachments home page as an example. The cutting edge is 100mm wide.

    190,60 €*

  • Ditching bucket

    The ditching bucket has a width of 195 mm. Optimally complemented with the hydraulic swivel changer Order No. 490-110. Supplied as shown as a bare part soldered ready for painting.

    212,85 €*

  • Multiripper

    Mutliripper for the PC490-10. The bucket is supplied blank as seen on the home attachments as an example. The cutting edge is 70mm wide. This bucket is especially suitable for hard soils

    197,20 €*

  • Fang PC490

    Ripper tooth for the PC490-10. The ripper tooth is supplied blank as shown on the Attachments home page as an example.

    182,70 €*

  • Rotary sieve bucket

    Rotary sieve bucket

    641,15 €*

  • Backhoe bucket wide

    Wide backhoe bucket for the PC490-10. The bucket is supplied blank as shown on the attachments home page as an example. The cutting edge is 110mm wide.

    195,55 €*

  • Backhoe bucket with straight edge

    Backhoe bucket with straight cutting edge for the PC490-10. The bucket is supplied blank as shown on the attachments home page as an example. The cutting edge is 90mm wide.

    187,85 €*

  • Backhoe narrow

    Narrow backhoe bucket for the PC490-10. The bucket is supplied blank as shown on the attachments home page as an example. The cutting edge is 70mm wide.

    185,35 €*

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

Kit contents (subject to technical changes)

Painting plays an extremely important role in functional model building. Whether with the color combination of the great prototype or in your own company color. Feel free to contact us, we will help you!

The goal is to create your individual and therefore perfect model.

We look forward to hearing from you and answering your questions.

We use cookies to optimize our website and offer you the best possible online experience. By clicking on "Allow" you agree to this. Further information can be found in our privacy policy.