Komatsu D71-24

You are here: Fumotec » Models » Komatsu D71-24

Komatsu D71-24 bulldozer kit

Item number: 7100

Included in the scope of delivery, are all components required for construction (hydraulics, drives, etc. see gallery kit contents), kit without rear ripper

5.986,70 € ()

   Incl. 19 % VAT plus shipping

Cannot be delivered to the following countries:

delivery in 3-6 week

Remember this for later

The model shown is an example and may include optional special accessories. The basic kit is supplied unpainted and not assembled.

INFO: In the tabsNEEDED ACCESSORIESand MODEL ACCESSORIESbelow, you will find all the necessary parts for building and expanding your personal dream model. After the desired transfer to the shopping cart, you can return to the respective store area via CONTINUE SHOPPING.

The Komatsu D71 PX-24 bulldozer.

Komatsu introduced a completely redesigned dozer called the D71-24 at the Conexpo trade show in 2020.

The D71-24 is a real powerhouse. The fuel-efficient Komatsu engine meets European Stage V emissions standards and offers 179 kW / 243 hp of power. The hydrostatic drive ensures maximum power. When required, maximum thrust is made available. The operating weight of the D71-24 is around 24 tons, depending on the equipment.

Characteristic of the latest dozer generation is the far forward offset driver's cab and the strongly sloped engine hood. The advantage of this design is a particularly good view of the Inpat blade.

Another highlight is the optional foldable dozer blade to limit the transport width to 3m.

Fumotec has transferred this all-rounder, with its many interesting details, to a scale of 1:14.5. Here is an excerpt of the most important model features:

We have worked hard to achieve a particularly sensitive drive. We succeeded with the so-called Fumotec super smooth brushless drive. We have created a particularly vivid video for you, which impressively demonstrates this sensitivity and power. You can find this video in the gallery section.

It also includes the possibility of programming a virtual gearbox. Thus it is possible to store different speeds in the remote control. This gives the modeler the possibility to fully concentrate on the shield.

This 6-way inpat shield is equipped with the foldable widening, just like the big original. Transport on a low loader thus loses its horror due to the excess width.

In the area of the driver's cab, we have given a lot of thought to the accommodation of the individual components. We have integrated the loudspeaker housing and thought of creating a lot of space for the accommodation of, for example, a 3S 5000mAh battery. Of course, the proven system of the RC decks has also found a reuse. The RC components find their place on the now total of 3 RC decks, which also contributes to easy assembly and maintenance. Easy access to all components is provided at all times.

The D71-24 of course comes with the well-known super sensitive Fumotec valves. The precision in the control is an outstanding feature, but also the easy expansion of the valves to be able to control additional functions.

The kit of the new Fumotec D71-24 will be equipped with all scale parts.

We recommend that you use our electronics set with the specially tuned Fumotec brushless controllers for fine control of the traction drive.

You can equip our dozer, as is the case with the original, with an optional rear ripper.

Technical data:

- Length without rear ripcord: 410 mm

- Width chains outside: 214 mm

- Width shield folded out: 290 mm

- Height to top of cabin: 238mm

- Weight: 8,3 kg

- Scale 1:14,5

- Pump with delivery volume of 700ml/min adjusted to the model for precise and direct control

- 12mm cylinder with 10mm piston - optimally adapted to the model for maximum performance

All specifications are approximate. Subject to technical changes

To build the model ready to run, you will need the following components or our electronics set:

-1x brushless controller for the pump motor (e.g. Roxxy 722)

-2x brushless controller for the chain drives. We recommend our Fumotec controller for brushless drives.

-3-4x servos for the hydraulic valves (e.g. HS 81 or similar)

-receiver (at least 7 channels)

-battery (e.g. Lipo 3S 5000 mAh)

-approx. 500 ml hydraulic oil

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

The model shown is an example and may include optional special accessories. The basic kit is supplied unpainted and not assembled.

Kit contents

Do you want your Fumotec model to be ready for immediate use or a Fumotec model kit to be sent to you already painted?

You don't have the time or desire to build? Would you like to have your model delivered ready for use for another reason? We are now offering three attractive service packages to support your desire for a finished and ready-to-use model right from the start. Our service once again gives you the opportunity to realize your dream model with Fumotec. A unique variety of models for every taste is now even more attractive! Orders for building and painting services can only be realized in conjunction with the purchase of a kit. These services are individual custom-made products which cannot be returned or exchanged!

  • Construction service D71

    You don't have the time or the desire to build? You want to get your model ready for another reason? We build your Fumotec dream model ready for use for you!

    1.581,20 €*

    Remember this for later

  • Painting service D71 Basic

    The Basic painting service includes painting with high-quality two-tone uni paints in Komatsu design. The cab is not painted on the inside and may show paint mist. Painting Basic is our low-cost alternative. Our goal is to color parts with a high quality paint and the skilled hand of a professional for a fair price. Visible parts are sanded before painting. Components that are not in the visible area may have a slight surface texture.

    1.491,20 €*

    Remember this for later

  • Painting service D71 exclusive

    Painting service D71-24 Exclusive - the name of this offer stands for itself. With this high-end paint job, the corresponding components are given an elaborate multi-layer paint job. A lot of effort is put into the type designation as well as the original manufacturer's lettering of the model: These are painted with much attention to detail in this service!

    1.735,60 €*

    Remember this for later

no products were found that match your selection criteria.

* All prices plus VAT plus shipping

We use cookies to optimize our website and offer you the best possible online experience. By clicking on "Allow" you agree to this. Further information can be found in our privacy policy.